-
@ GrowDojo
2025-02-26 00:32:38
》 3.5MM (2 CONTACT / TS) / AUDIO & VISUAL / CONNECTORS
[R2.P5-6]
-
• Typical use: mono audio
• Contacts: 2
• A TS plug configuration is as simple as it comes: the tip connector carries the audio signal, while the sleeve serves the signal ground.
• Due to the simplicity of their build, TS cables tend to be noisier than other alternatives. The risk of noise increases with the length of the cable in question. TS connections can only carry unbalanced mono audio, as only the tip of the plug carries an audio signal.
• If a 2-conductor plug is inserted into a 3-conductor socket, then the socket's ring is shorted to ground, thus any signal sent from that socket's ring is lost. Equipment not designed for this short might, for instance, damage an audio amplifier channel.
-
Creative Commons 4.0 Attribution-ShareAlike by NODE and Baptiste
https://m.primal.net/PLWH.jpg
https://m.primal.net/PLWI.jpg